Skip to main content

Buy a Batch of Stamps

A postage batch is required to upload data to Swarm. Postage stamp batches represent right to write data on Swarm's DISC (Distributed Immutable Store of Chunks). The parameters which control the duration and quantity of data that can be stored by a postage batch are depth and amount, with depth determining data volume that can be uploaded by the batch and amount determining storage duration of data uploaded with the batch.

For a deeper understanding of how depth and amount parameters determine the data volume and storage duration of a postage batch, see the postage stamp page.

Fund your node's wallet.​

In order to purchase a postage stamp batch, your node's Gnosis Chain address needs to be funded with sufficient xDAI to pay gas for transaction fees on Gnosis Chain as well as sufficient xBZZ to pay for the cost of the postage stamp batch itself.

xBZZ can be obtained from a variety of different centralized and decentralized exchanges. You can find more information on where to obtain xBZZ on the Ethswarm homepage.

xDAI can be obtained from a wide range of centralized and decentralized exchanges. See this list of exchanges from the Gnosis Chain documentation to get started.

Buying a stamp batch​

When interacting with the Bee API directly, amount and depth are passed as path parameters:

curl -s -X POST http://localhost:1633/stamps/<amount>/<depth>

And with Swarm CLI, they are set using option flags:

swarm-cli stamp buy --depth <depth value> --amount <amount value>

API​

curl -s -X POST http://localhost:1633/stamps/100000000/20
{
  "batchID": "8fcec40c65841e0c3c56679315a29a6495d32b9ed506f2757e03cdd778552c6b",
  "txHash": "0x51c77ac171efd930eca8f3a77e3fcd5aca0a7353b84d5562f8e9c13f5907b675"
}
info

Once your batch has been purchased, it will take a few minutes for other Bee nodes in the Swarm to catch up and register your batch. Allow some time for your batch to propagate in the network before proceeding to the next step.

Setting stamp batch parameters and options​

When purchasing a batch of stamps there are several parameters and options which must be considered. The depth parameter will control how many chunks can be uploaded with a batch of stamps. The amount parameter determines how much xBZZ will be allocated per chunk, and therefore also controls how long the chunks will be stored. While the immutable header option sets the batch as either mutable or immutable, which can significantly alter the behavior of the batch utilisation (more details below).

Choosing depth​

caution

The minimum value for depth is 17, however a higher depth value is recommended for most use cases due to the mechanics of stamp batch utilisation. See the depths utilisation table to help decide which depth is best for your use case.

One notable aspect of batch utilisation is that the entire batch is considered fully utilised as soon as any one of its buckets are filled. This means that the actual amount of chunks storable by a batch is less than the nominal maximum amount.

See the postage stamp page for a more complete explanation of how batch utilisation works and a table with the specific amounts of data which can be safely uploaded for each depth value.

Choosing amount​

caution

The minimum amount value for purchasing stamps is required to be at least enough to pay for 24 hours of storage. To find this value multiply the lastPrice value from the postage stamp contract times 17280 (the number of blocks in 24 hours). You can also use the calculator below. This requirement is in place in order to prevent spamming the network.

The amount parameter determines how much xBZZ is assigned per chunk for a postage stamp batch. You can use the calculators below to find the appropriate amount value for your target duration of storage and can also preview the price. For more information see the postage stamp page where a more complete description is included.

Mutable or Immutable?​

Depending on the use case, uploaders may desire to use mutable or immutable batches. The fundamental difference between immutable and mutable batches is that immutable batches become unusable once their capacity is filled, while for mutable batches, once their capacity is filled, they may continue to be used, however older chunks of data will be overwritten with the newer once over capacity. The default batch type is immutable. In order to set the batch type to mutable, the immutable header should be set to false. See this section on postage stamp batch utilisation to learn more about mutable vs immutable batches, and about which type may be right for your use case.

Calculators​

The following postage batch calculators allow you to conveniently find the depth and amount values for a given storage duration and storage volume, or to find the storage duration and storage volume for a given depth and amount. The results will display the cost in xBZZ for the postage batch. The current pricing information is sourced from the Swarmscan API and will vary over time.

info

The 'effective volume' is the volume of data that can safely stored for each storage depth. The 'theoretical max volume' is significantly lower than the effective volume at lower depths and the two values trend towards the same value at higher depths. The lowest depth with an effective volume above zero is 22, with an effective depth of 4.93 GB. Lower depth values can be used for smaller uploads but do not come with the same storage guarantees. Learn more here.

Depth & Amount to Time & Volume Calculator​

Time & Volume to Depth & Amount Calculator​

The recommended depth in this calculator's results is the lowest depth value whose effective volume is greater than the entered volume.

Viewing Stamps​

To check on your stamps, send a GET request to the stamp endpoint.

API​

curl http://localhost:1633/stamps
{
  "stamps": [
    {
      "batchID": "f4b9830676f4eeed4982c051934e64113dc348d7f5d2ab4398d371be0fbcdbf5",
      "utilization": 0,
      "usable": true,
      "label": "",
      "depth": 20,
      "amount": "100000000",
      "bucketDepth": 16,
      "blockNumber": 30643611,
      "immutableFlag": true,
      "exists": true,
      "batchTTL": 20588,
      "expired": false
    }
  ]
}
info

It is not possible to reupload unencrypted content which was stamped using an expired postage stamp.

Checking the remaining TTL (time to live) of your batch​

info

At present, TTL is a primitive calculation based on the current storage price and the assumption that storage price will remain static in the future. As more data is uploaded into Swarm, the price of storage will begin to increase. For data that it is important to keep alive, make sure your batches have plenty of time to live!

In order to make sure your batch has sufficient remaining balance to be stored and served by nodes in its area of responsibility, you must regularly check on its time to live and act accordingly. The time to live is the number of seconds before the chunks will be considered for garbage collection by nodes in the network.

The remaining time to live in seconds is shown in the API in the returned json object as the value for batchTTL, and with Swarm CLI you will see the formatted TTL as the TTL value.

API​

curl http://localhost:1633/stamps
{
  "stamps": [
    {
      "batchID": "f4b9830676f4eeed4982c051934e64113dc348d7f5d2ab4398d371be0fbcdbf5",
      "utilization": 0,
      "usable": true,
      "label": "",
      "depth": 20,
      "amount": "100000000",
      "bucketDepth": 16,
      "blockNumber": 30643611,
      "immutableFlag": true,
      "exists": true,
      "batchTTL": 20588,
      "expired": false
    }
  ]
}

Top up your batch​

danger

Don't let your batch run out! If it does, you will need to restamp and resync your content.

If your batch is starting to run out, or you would like to extend the life of your batch to protect against storage price rises, you can increase the batch TTL by topping up your batch using the stamps endpoint, passing in the relevant batchID into the HTTP PATCH request.

API​

curl -X PATCH "http://localhost:1633/stamps/topup/6d32e6f1b724f8658830e51f8f57aa6029f82ee7a30e4fc0c1bfe23ab5632b27/10000000"

Dilute your batch​

In order to store more data with a batch of stamps, you must "dilute" the batch. Dilution simply refers to increasing the depth of the batch, thereby allowing it to store a greater number of chunks. As dilution only increases the the depth of a batch and does not automatically top up the batch with more xBZZ, dilution will decrease the TTL of the batch. Therefore if you wish to store more with your batch but don't want to decrease its TTL, you will need to both dilute and top up your batch with more xBZZ.

API​

Here we call the /stamps endpoint and find a batch with depth 24 and a batchTTL of 2083223 which we wish to dilute:

curl  http://localhost:1633/stamps
{
    "stamps": [
        {
            "batchID": "0e4dd16cc435730a25ba662eb3da46e28d260c61c31713b6f4abf8f8c2548ae5",
            "utilization": 0,
            "usable": true,
            "label": "",
            "depth": 24,
            "amount": "10000000000",
            "bucketDepth": 16,
            "blockNumber": 29717348,
            "immutableFlag": false,
            "exists": true,
            "batchTTL": 2083223,
            "expired": false
        }
    ]
}

Next we call the dilute endpoint to increase the depth of the batch using the batchID and our new depth of 26:

curl -s -XPATCH http://localhost:1633/stamps/dilute/0e4dd16cc435730a25ba662eb3da46e28d260c61c31713b6f4abf8f8c2548ae5/26

And a txHash of our successful transaction:

{
    "batchID": "0e4dd16cc435730a25ba662eb3da46e28d260c61c31713b6f4abf8f8c2548ae5",
    "txHash": "0x298e80358b3257292752edb2535a1cd84440c074451b61f78fab349aea4962b7"
}

And finally we use the /stamps endpoint again to confirm the new depth and decreased batchTTL:

curl  http://localhost:1633/stamps

We can see the new depth of 26 and a decreased batchTTL of 519265.

{
    "stamps": [
        {
            "batchID": "0e4dd16cc435730a25ba662eb3da46e28d260c61c31713b6f4abf8f8c2548ae5",
            "utilization": 0,
            "usable": true,
            "label": "",
            "depth": 26,
            "amount": "10000000000",
            "bucketDepth": 16,
            "blockNumber": 29717348,
            "immutableFlag": false,
            "exists": true,
            "batchTTL": 519265,
            "expired": false
        }
    ]
}

Stewardship​

The stewardship endpoint in combination with pinning can be used to guarantee that important content is always available. It is used for checking whether the content for a Swarm reference is retrievable and for re-uploading the content if it is not.

An HTTP GET request to the stewardship endpoint checks to see whether the content for the specified Swarm reference is retrievable:

info

stewardship is not currently supported by Swarm CLI

curl "http://localhost:1633/stewardship/c0c2b70b01db8cdfaf114cde176a1e30972b556c7e72d5403bea32e
c0207136f"
{
  "isRetrievable": true
}

If the content is not retrievable, an HTTP PUT request can be used to re-upload the content:

curl -X PUT "http://localhost:1633/stewardship/c0c2b70b01db8cdfaf114cde176a1e30972b556c7e72d5403bea32ec0207136f"

Note that for the re-upload to succeed, the associated content must be available locally, either pinned or cached. Since it isn't easy to predict if the content will be cached, for important content pinning is recommended.